using JinYuan.Helper;
using JinYuan.MES.Models;
using JinYuan.Models;
using JinYuan.VirtualDataLibrary;
using Language;
using PLCCommunication;
using PLCCommunication.Common;
using PLCCommunication.Modbus;
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.IO;
using System.Linq;
using System.Threading;
using System.Threading.Tasks;
using static System.Windows.Forms.LinkLabel;

namespace JinYuan.ControlCenters
{
    public partial class ControlCenter
    {
        #region 刷新12小时产能

        public int GetHour()
        {
            DateTime now = DateTime.Now;
            int nowHour = Convert.ToInt32($"{now.Hour}30");
            int hour = 0;
            if (CommonMethods.LastHour != nowHour)
            {
                hour = Convert.ToInt32($"{now.Hour - 1}30");
                if (now.Hour == 0)
                {
                    hour = 2330;
                }
            }
            else
            {
                hour = Convert.ToInt32($"{now.Hour}30");
            }
            return hour;
        }


        public void Refresh12HourProdQty()
        {
            List<Chart12HourData> chart12Hours = new List<Chart12HourData>();
            DateTime dtTime = DateTime.Now;
            string strDate = dtTime.ToString("yyyy-MM-dd");
            string nextDate = dtTime.AddDays(1).ToString("yyyy-MM-dd");
            int Hour = GetHour();

            var listTotal = CommonMethods.db.QueryWhereList<Hourprod>(t =>
                t.FDate == strDate || t.FDate == nextDate);// 查询两天的数据

            if (listTotal != null && listTotal.Count > 0)
            {
                for (int i = 0; i < 24; i++) // 改为24小时
                {
                    int currentHour = (i + 8) % 24; // 从8点开始
                    int nextHour = (currentHour + 1) % 24;
                    string currentDate = currentHour >= 8 ? strDate : nextDate;

                    var hour1 = listTotal.Where(p =>
                        p.FDate == currentDate &&
                        p.FHour == currentHour).FirstOrDefault();

                    int ProdALLQty = 0;
                    int ProdOKQty = 0;
                    int ProdNGQty = 0;
                    string strOkRatio = "0.00";
                    if (hour1 != null)
                    {
                        ProdALLQty = hour1.ProdIn;
                        ProdOKQty = hour1.ProdOut;
                    }
                    ProdNGQty = ProdALLQty - ProdOKQty;
                    if (ProdOKQty >= 0 && ProdALLQty > 0)
                    {
                        strOkRatio = (Math.Round(decimal.Parse(ProdOKQty.ToString()) / decimal.Parse(ProdALLQty.ToString()), 4)).ToString();
                    }
                    string displayTime = $"{currentHour:D2}:30~{nextHour:D2}:29";

                    chart12Hours.Add(new Chart12HourData()
                    {
                        DisplayTime = displayTime,
                        ProdIn = ProdALLQty,
                        ProdOut = ProdOKQty,
                        ProdNg = ProdNGQty,
                        OKRatio = strOkRatio
                    });
                }
            }
            else
            {
                for (int i = 0; i < 24; i++)
                {
                    int currentHour = (i + 8) % 24;
                    int nextHour = (currentHour + 1) % 24;

                    Random rand = new Random();
                    int ranOK = rand.Next(1000, 3000);
                    int ranNG = rand.Next(400, 1200);
                    int total = ranOK + ranNG;
                    string displayTime = $"{currentHour:D2}:30~{nextHour:D2}:29";
					string strOkRatio = (Math.Round(decimal.Parse(ranOK.ToString()) / decimal.Parse(total.ToString()), 4)).ToString();
                    chart12Hours.Add(new Chart12HourData()
                    {
                        DisplayTime = displayTime,
                        ProdIn = ranOK + ranNG,
                        ProdOut = ranOK,
                        ProdNg = ranNG,
                        OKRatio = strOkRatio // 保留2位小数，添加%
                    });
                }
            }
            if (chart12Hours != null)
            {
                CommonMethods.Lst_Prod12HourData = chart12Hours;
            }
        }
        #endregion

        #region 检测项不良
        /// <summary>
        /// 读取检测项不良
        /// </summary>
        private void GetDefectTypeQty()
        {

            try
            {
                if (CommonMethods.Lst_DefectTypeQty.Count <= 0)
                {

                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "极性检测不良".Translated(), DataCount = 0 });
                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "称重不良".Translated(), DataCount = 0 });
                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "铜极耳剪切不良".Translated(), DataCount = 0 });
                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "铝极耳剪切不良".Translated(), DataCount = 0 });
                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "厚度不良", DataCount = 0 });
                    //CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "焊前CCD正极耳顶面不良", DataCount = 0 });
                    CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "扫码不良".Translated(), DataCount = 0 });
                    CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "MES不良".Translated(), DataCount = 0 });
                    CommonMethods.Lst_DefectTypeQty.Add(new ChartDataType { DataType = "其他不良".Translated(), DataCount = 0 });
                }
                else //读取PLC数据
                {
                    if (CommonMethods.plcDevices[0] != null && CommonMethods.plcDevices[0].IsConnected)
                    {
                        Task.Run(() =>
                        {
                            try
                            {
                                int ProdDRFIDNgQty = CommonMethods.plcDevices[0].ReadInt16("D1000");//扫码不良
                                int ProdDXNgQty = CommonMethods.plcDevices[0].ReadInt16("D1001");//MES不良
                                int ProdGRFIDNgQty = CommonMethods.plcDevices[0].ReadInt16("D1002");//其他不良
                                //int ProdDRFIDNgQty = CommonMethods.plcDevices[0].ReadInt16("D1000");//极性检测不良
                                //int ProdDXNgQty = CommonMethods.plcDevices[0].ReadInt16("D1002");//称重不良
                                //int ProdGRFIDNgQty = CommonMethods.plcDevices[0].ReadInt16("D1006");//铜极耳剪切不良
                                //int ProdYLZNgQty = CommonMethods.plcDevices[0].ReadInt16("D1004");//铝极耳剪切不良

                                //從PLC讀取數據賦值給到NGList
                                CommonMethods.Lst_DefectTypeQty.Where(p => p.DataType == "扫码不良".Translated()).FirstOrDefault().DataCount = ProdDRFIDNgQty;
                                CommonMethods.Lst_DefectTypeQty.Where(p => p.DataType == "MES不良".Translated()).FirstOrDefault().DataCount = ProdDXNgQty;
                                CommonMethods.Lst_DefectTypeQty.Where(p => p.DataType == "其他不良".Translated()).FirstOrDefault().DataCount = ProdGRFIDNgQty;
                                //CommonMethods.Lst_DefectTypeQty.Where(p => p.DataType == "铝极耳剪切不良".Translated()).FirstOrDefault().DataCount = ProdYLZNgQty;
                            }
                            catch (Exception ex)
                            {
                                LogHelper.Instance.WriteEX(ex);
                            }
                        });

                    }
                }
            }
            catch (Exception ex)
            {
                LogHelper.Instance.WriteEX(ex);
            }
        }
        #endregion

        #region 智能电表 ---默认D1100开始
        public void GetEnergyData()
        {
            ModbusRtu busRtuClient = new ModbusRtu();
            if (CommonMethods.plcDevices.Count > 0 && CommonMethods.plcDevices[0] != null && CommonMethods.plcDevices[0].IsConnected)
            {
                List<ElectricEnergy> listM = new List<ElectricEnergy>();
                List<float> ListF = new List<float>();
                List<string> listAddre = new List<string>()
                {
                    "D1100","D1102","D1104","D1106","D1108","D1110","D1112","D1114","D1116","D1118","D1120","D1122","D1124","D1126"
                };
                try
                {

                    ElectricEnergy m = new ElectricEnergy();
                    //for (int i = 0; i < listAddre.Count; i++)
                    //{
                    //    ListF.Add(CommonMethods.plcDevices[0].ReadFloat(listAddre[i]));
                    //}

                    //m.AccumulatedElectricity = (Decimal)ListF[0];   //有功电能（累计电能）D1100
                    //m.PhaseVoltageA = (Decimal)ListF[1]; ; //A相电压 D1102
                    //m.PhaseVoltageB = (Decimal)ListF[2]; ;//B相电压 D1104
                    //m.PhaseVoltageC = (Decimal)ListF[3]; ;//C相电压 D1106
                    //m.PhaseCurrentA = (Decimal)ListF[4]; ; //电流IA D1108
                    //m.PhaseCurrentB = (Decimal)ListF[5]; ;//电流IB D1110
                    //m.PhaseCurrentC = (Decimal)ListF[6]; ;//电流IC D1112
                    //m.PhasePowerA = (Decimal)ListF[7]; ; //A相有功功率 D1114
                    //m.PhasePowerB = (Decimal)ListF[8]; ; //B相有功功率 D1116
                    //m.PhasePowerC = (Decimal)ListF[9]; ;//C相有功功率 D1118
                    //m.ActivePower = (Decimal)ListF[10]; ; //总有功功率 D1120
                    //m.PowerFactor = (Decimal)ListF[11]; ; //总功率因数 D1122
                    //m.pt = (Decimal)ListF[12]; ; //电压变比 D1124
                    //m.ct = (Decimal)ListF[13]; ;  //电流变比 D1126

                    //listM.Add(m);
                    //CommonMethods.listElectricEnergy = listM;
                    //return;

                    busRtuClient.SerialPortInni(sp =>
                    {
                        sp.PortName = "COM3";
                        sp.BaudRate = 9600;
                        sp.DataBits = 8;
                        sp.StopBits = System.IO.Ports.StopBits.One;
                        sp.Parity = System.IO.Ports.Parity.None;
                    });
                    busRtuClient.DataFormat = (PLCCommunication.Common.DataFormat)DataFormat.CDAB;
                    busRtuClient.Open(); // 打开
                    if (busRtuClient.IsOpen())
                    {
                        // 读取数据
                        JYResult<byte[]> readResult = busRtuClient.Read("35", 30);
                        JYResult<byte[]> readResult1 = busRtuClient.Read("3", 2);
                        if (readResult.IsSuccess && readResult1.IsSuccess)
                        {
                            //DPT
                            Byte DptH = busRtuClient.ByteTransform.TransByte(readResult.Content, 0);//高8位
                            Byte DptL = busRtuClient.ByteTransform.TransByte(readResult.Content, 1);//低8位
                            //DPQ
                            Byte DpqH = busRtuClient.ByteTransform.TransByte(readResult.Content, 2);//高8位
                            Byte DpqL = busRtuClient.ByteTransform.TransByte(readResult.Content, 3);//低8位

                            //m = new ElectricEnergy();
                            Decimal q = busRtuClient.ByteTransform.TransUInt16(readResult.Content, 56);
                            Decimal w = busRtuClient.ByteTransform.TransUInt16(readResult.Content, 58);

                            m.pt = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult1.Content, 0)); //电压变比 D1124
                            m.ct = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult1.Content, 2));  //电流变比 D1126
                            Decimal Power = (q * 65536 + w) / 1000;
                            m.AccumulatedElectricity = Convert.ToDecimal(Power * m.pt * m.ct);   //有功电能（累计电能）D1100
                            ListF.Add((float)m.AccumulatedElectricity.Value);
                            //电压
                            m.PhaseVoltageA = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 4) * Math.Pow(10, DptH - 4)); //A相电压 D1102
                            m.PhaseVoltageB = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 6) * Math.Pow(10, DptH - 4));//B相电压 D1104
                            m.PhaseVoltageC = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 8) * Math.Pow(10, DptH - 4));//C相电压 D1106
                            ListF.Add((float)m.PhaseVoltageA.Value);
                            ListF.Add((float)m.PhaseVoltageB.Value);
                            ListF.Add((float)m.PhaseVoltageC.Value);

                            //电流
                            m.PhaseCurrentA = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 16) * Math.Pow(10, DptL - 4)); //电流IA D1108
                            m.PhaseCurrentB = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 18) * Math.Pow(10, DptL - 4));//电流IB D1110
                            m.PhaseCurrentC = Convert.ToDecimal(busRtuClient.ByteTransform.TransUInt16(readResult.Content, 20) * Math.Pow(10, DptL - 4));//电流IC D1112
                            ListF.Add((float)m.PhaseCurrentA.Value);
                            ListF.Add((float)m.PhaseCurrentB.Value);
                            ListF.Add((float)m.PhaseCurrentC.Value);

                            //有功功率
                            m.PhasePowerA = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult.Content, 22) * Math.Pow(10, DpqH - 4)); //A相有功功率 D1114
                            m.PhasePowerB = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult.Content, 24) * Math.Pow(10, DpqH - 4)); //B相有功功率 D1116
                            m.PhasePowerC = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult.Content, 26) * Math.Pow(10, DpqH - 4));//C相有功功率 D1118
                            m.ActivePower = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult.Content, 28) * Math.Pow(10, DpqH - 4)); //总有功功率 D1120
                            ListF.Add((float)m.PhasePowerA.Value);
                            ListF.Add((float)m.PhasePowerB.Value);
                            ListF.Add((float)m.PhasePowerC.Value);
                            ListF.Add((float)m.ActivePower.Value);
                            m.PowerFactor = Convert.ToDecimal(busRtuClient.ByteTransform.TransInt16(readResult.Content, 44)) / 1000; //总功率因数 D1122
                            ListF.Add((float)m.PowerFactor.Value);
                            ListF.Add((float)m.pt.Value);
                            ListF.Add((float)m.ct.Value);

                            for (int i = 0; i < ListF.Count; i++)
                            {
                                CommonMethods.plcDevices[0].WriteFloat(listAddre[i], ListF[i]);
                            }
                            listM.Add(m);
                            CommonMethods.listElectricEnergy = listM;

                        }
                        else
                        {
                            TxtHelper.WriteTxt($@"D:\APILog\Logs\智能电表信息\{DateTime.Now.ToString("yyyy-MM-dd")}.txt", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss") + "智能电表:读取数据失败");
                        }
                    }
                    else
                    {
                        TxtHelper.WriteTxt($@"D:\APILog\Logs\智能电表信息\{DateTime.Now.ToString("yyyy-MM-dd")}.txt", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss") + "智能电表：串口打开失败");
                    }
                }
                catch (Exception ex)
                {
                    TxtHelper.WriteTxt($@"D:\APILog\Logs\智能电表信息\{DateTime.Now.ToString("yyyy-MM-dd")}.txt", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss") + $"智能电表:{ex}");
                }
                finally
                {
                    if (busRtuClient.IsOpen())
                    {
                        busRtuClient.Close();
                    }
                }

            }
        }

        public void GetEnergyDataFormPlc()
        {
            //if (CommonMethods.plcDevices.Count <= 0) { return; }
            if (CommonMethods.plcDevices[0] != null && CommonMethods.plcDevices[0].IsConnected && CommonMethods.energyMeter.IsConnected)
            {

                List<ElectricEnergy> listM = new List<ElectricEnergy>();
                List<float> ListF = new List<float>();
                List<string> listAddre = new List<string>()
                 {
                     //"D1100","D1102","D1104","D1106","D1108","D1110","D1112","D1114","D1116","D1118","D1120","D1122","D1124","D1126"
                     "D1300","D1302","D1304","D1306","D1308","D1310","D1312","D1314","D1316","D1318","D1320","D1322","D1324","D1326"
                 };
                //00 00 00 00 00 06 报文头
                //01 04 00 00 00 3E 不需要校验位
                byte[] bytes = new byte[12];
                bytes[0] = Convert.ToByte(01 >> 8);  // Slave id high byte//事务元标识符,高字节在前,低字节在后  
                bytes[1] = Convert.ToByte(01);// Slave id low byte
                bytes[2] = 0x00;//协议标识符,高字节在前,低字节在后  (TCP 00)
                bytes[3] = 0x00;
                bytes[4] = 0x00;//后续字节长度,高字节在前,低字节在后
                bytes[5] = 0x06;                                // Message size
                bytes[6] = 0x01;                                // Slave address
                bytes[7] = 0x04;//功能码04H		                // Function code
                bytes[8] = Convert.ToByte((00 >> 8) & 0xFF);      // Start address//寄存器起始地址高字节m_unBeginWord
                bytes[9] = Convert.ToByte(00 & 0xFF);             // Start address//寄存器起始地址低字节m_unBeginWord
                bytes[10] = Convert.ToByte((88 >> 8) & 0xFF);   // Number of data to read//寄存器数量高字节m_unWordsCount 
                bytes[11] = Convert.ToByte(88 & 0xFF);		  // Number of data to read//寄存器数量低字节m_unWordsCount 0x58

                try
                {
                    CommonMethods.energyMeter.SendAndGetRes(bytes, ref listM);
                    #region 读取×
                    //for (int i = 0; i < listAddre.Count; i++)
                    //{
                    //    float val = CommonMethods.plcDevices[0].ReadFloat(listAddre[i]);
                    //    ListF.Add(val);
                    //}

                    //ElectricEnergy m = new ElectricEnergy();
                    //m.AccumulatedElectricity = Convert.ToDecimal(ListF[0]);
                    //m.PhaseVoltageA = Convert.ToDecimal(ListF[1]);
                    //m.PhaseVoltageB = Convert.ToDecimal(ListF[2]);
                    //m.PhaseVoltageC = Convert.ToDecimal(ListF[3]);
                    //m.PhaseCurrentA = Convert.ToDecimal(ListF[4]);
                    //m.PhaseCurrentB = Convert.ToDecimal(ListF[5]);
                    //m.PhaseCurrentC = Convert.ToDecimal(ListF[6]);
                    //m.PhasePowerA = Convert.ToDecimal(ListF[7]);
                    //m.PhasePowerB = Convert.ToDecimal(ListF[8]);
                    //m.PhasePowerC = Convert.ToDecimal(ListF[9]);
                    //m.ActivePower = Convert.ToDecimal(ListF[10]);
                    //m.PowerFactor = Convert.ToDecimal(ListF[11]);
                    //m.pt = Convert.ToDecimal(ListF[12]);
                    //m.ct = Convert.ToDecimal(ListF[13]);

                    //listM.Add(m);
                    #endregion
                    foreach (ElectricEnergy energy in listM)
                    {
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[0], (float)energy.AccumulatedElectricity);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[1], (float)energy.PhaseVoltageA);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[2], (float)energy.PhaseVoltageB);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[3], (float)energy.PhaseVoltageC);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[4], (float)energy.PhaseCurrentA);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[5], (float)energy.PhaseCurrentB);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[6], (float)energy.PhaseCurrentC);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[7], (float)energy.PhasePowerA);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[8], (float)energy.PhasePowerB);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[9], (float)energy.PhasePowerC);

                        CommonMethods.plcDevices[0].WriteFloat(listAddre[10], (float)energy.ActivePower);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[11], (float)energy.PowerFactor);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[12], (float)energy.pt);
                        CommonMethods.plcDevices[0].WriteFloat(listAddre[13], (float)energy.ct);
                    }
                    CommonMethods.listElectricEnergy = listM;
                }
                catch (Exception ex)
                {
                    TxtHelper.WriteTxt($@"D:\APILog\Logs\智能电表信息\{DateTime.Now.ToString("yyyy-MM-dd")}.txt", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss") + $"智能电表:{ex}");
                }
            }
        }

        /// <summary>
        /// 能耗上传MES
        /// </summary>
        public async void UploadEquEnergy()
        {
            if (CommonMethods.listElectricEnergy.Count > 0)
            {
                if (CommonMethods.mesConfig.isUpMes)
                {
                    string msg = string.Empty;
                    DateTime nowDate = DateTime.Now;
                    string filePath = string.Empty;
                    string fileName = string.Empty;
                    string fileTitle = string.Empty;
                    string fileContent = string.Empty;
                    List<WattrMeter> listP = new List<WattrMeter>();
                    int i = 0;
                    foreach (ElectricEnergy m in CommonMethods.listElectricEnergy)
                    {
                        WattrMeter param = new WattrMeter();
                        param.siteCode = CommonMethods.mesConfig.siteCode;
                        param.lineCode = CommonMethods.mesConfig.lineCode;
                        param.equipNum = CommonMethods.mesConfig.equipNum;
                        param.userName = CommonMethods.mesConfig.mesUserName;
                        param.electricMeterNum = CommonMethods.mesConfig.electricMeterNum[i];
                        param.recordDate = nowDate.ToString("yyyy-MM-dd HH:mm:ss");
                        param.accumulatedElectricity = (decimal)m.AccumulatedElectricity;
                        param.phaseVoltageA = (decimal)m.PhaseVoltageA;
                        param.phaseVoltageB = (decimal)m.PhaseVoltageB;
                        param.phaseVoltageC = (decimal)m.PhaseVoltageC;
                        param.phaseCurrentA = (decimal)m.PhaseCurrentA;
                        param.phaseCurrentB = (decimal)m.PhaseCurrentB;
                        param.phaseCurrentC = (decimal)m.PhaseCurrentC;
                        param.phasePowerA = (decimal)m.PhasePowerA;
                        param.phasePowerB = (decimal)m.PhasePowerB;
                        param.phasePowerC = (decimal)m.PhasePowerC;
                        param.activePower = (decimal)m.ActivePower;
                        param.powerFactor = (decimal)m.PowerFactor;
                        param.pt = (decimal)m.pt;
                        param.ct = (decimal)m.ct;

                        listP.Add(param);
                        i++;

                        // 写csv文件
                        string productName = string.Empty;

                        filePath = $@"{CommonMethods.strWattrMeterpath}\{nowDate.Year}\{nowDate.Month}";
                        fileName = $@"{nowDate.Day}.csv";
                        fileTitle = "工序名称,生产机台编号,拉线,型号,物料编号,操作人员,班次,电表编号,采集时间,有功电能（累计电能）KwH,A相电压 V,B相电压 V,C相电压 V,A相电流 A,B相电流 A,C相电流 A,A相功率 Kw,B相功率 Kw,C相功率 Kw,总有功功率 Kw,总功率因数 %,电压变比,电流变比";
                        fileContent = $"包装工序,{CommonMethods.mesConfig.equipNum},{CommonMethods.mesConfig.lineCode},{productName},{CommonMethods.mesConfig.MaterialCode},{CommonMethods.mesConfig.mesUserName},{CommonMethods.strClass},{param.electricMeterNum},{nowDate.ToString("yyyy-MM-dd HH:mm:ss")}," +
                            $"{param.accumulatedElectricity},{param.phaseVoltageA},{param.phaseVoltageB},{param.phaseVoltageC},{param.phaseCurrentA},{param.phaseCurrentB},{param.phaseCurrentC}," +
                            $"{param.phasePowerA},{param.phasePowerB},{param.phasePowerC},{param.activePower},{param.powerFactor},{param.pt},{param.ct}";
                        CSVHelper<object>.WriterCSV(filePath, fileName, fileTitle, fileContent);
                    }
                    //上传MES
                    var (success, mesg) = await CommonMethods.hbgMes.UploadEquEnergyAsync(CommonMethods.mesConfig.EnergyConsumption, CommonMethods.mesConfig.equipNum, CommonMethods.mesConfig.siteCode, CommonMethods.mesConfig.lineCode,
                    CommonMethods.mesConfig.mesUserName, CommonMethods.mesConfig.electricMeterNum, listP);
                }
            }
        }

        public static byte[] CalculateCRCTemp(ref byte[] messageArray, int dataLength)
        {
            byte usCRCHi = 0xFF;
            byte usCRCLo = 0xFF;
            byte[] returnResult = { 0x00, 0x00 };
            int index = 0;
            int messageIndex = 0;
            while (dataLength > 0)
            {
                index = usCRCLo ^ messageArray[messageIndex];
                usCRCLo = Convert.ToByte(usCRCHi ^ crcHi[index]);
                usCRCHi = crcLo[index];
                messageIndex++;
                dataLength--;
            }
            //0th item is crcLo
            returnResult[0] = usCRCLo;
            //1st item is crcHi
            returnResult[1] = usCRCHi;
            //2nd item is the total CRC16.
            //returnResult[2] = Convert.ToByte((usCRCHi << 8 | usCRCLo));
            return returnResult;
        }

        static byte[] crcHi =
        {
            0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
            0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
            0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
            0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
            0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81,
            0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0,
            0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
            0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
            0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
            0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
            0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
            0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
            0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
            0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
            0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
            0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
            0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
            0x40
        };

        static byte[] crcLo =
        {
            0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4,
            0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09,
            0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD,
            0x1D, 0x1C, 0xDC, 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
            0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32, 0x36, 0xF6, 0xF7,
            0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A,
            0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE,
            0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
            0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2,
            0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F,
            0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB,
            0x7B, 0x7A, 0xBA, 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
            0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0, 0x50, 0x90, 0x91,
            0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C,
            0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88,
            0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
            0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80,
            0x40
        };
        #endregion

        #region 定期清理本地保存下料数据
        /// <summary>
        /// 定期清理本地保存下料数据
        /// </summary>
        public void DeleteFileOfLocal()
        {
            try
            {
                //string filePath = string.Format(@"{0}\Data\{1}", Application.StartupPath, DateTime.Now.AddDays(-365).Year);
                string filePath = string.Format(@"{0}\{1}", @"D:\LocalData", DateTime.Now.AddYears(-1).Year);
                if (Directory.Exists(filePath))
                {
                    //判断是否有子文件夹，循环删除
                    for (int i = 1; i <= DateTime.Now.Month; i++)
                    {
                        string tempPath = string.Format(@"{0}\{1}", filePath, i);
                        if (Directory.Exists(tempPath))
                        {
                            LogCLear_DirOrFile("下料本地文件", DateTime.Now, tempPath, 365);
                        }
                    }
                    //没有子文件夹，删除目录
                    DirectoryInfo[] DirList = GetSubcatalog(filePath);//获取文件路径
                    if (DirList != null)//目录存在
                    {
                        if (DirList.Length == 0)
                        {
                            Directory.Delete(filePath, true);
                            Thread.Sleep(10);
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                LogHelper.Instance.WriteLog($"定期清理本地保存下料数据异常:{ex.ToString()}", "Info");
            }

        }

        /// <summary>清理指定目录下的文件夹或文件 </summary>
        /// <param name="strName">清理文件注释</param>
        /// <param name="CurrentTime">当前时间</param>
        /// <param name="FilePath">文件目录</param>
        /// <param name="RtnDayNums">保留天数</param>
        public void LogCLear_DirOrFile(string strName, DateTime CurrentTime, string FilePath, uint RtnDayNums)
        {
            long time = 0;
            Stopwatch stopWatch = new Stopwatch();
            stopWatch.Start();
            bool b_OK = true;
            LogHelper.Instance.WriteLog($"清理{strName}开始", "Info");
            try
            {
                DirectoryInfo[] DirList = GetSubcatalog(FilePath);//获取文件路径
                if (DirList != null)//目录不存在
                {
                    if (DirList.Length != 0)//目录是否有子文件夹：如 文件夹“2021-10-31”
                    {
                        #region 删文件夹
                        foreach (var dirInfo in DirList)//循环删除文件夹
                        {
                            DateTime itemDateTime = dirInfo.CreationTime;//获取文件夹创建日期
                            if (CurrentTime.AddDays(-RtnDayNums) > itemDateTime)
                            {
                                if (dirInfo.Exists)
                                {
                                    dirInfo.Delete(true);
                                    Thread.Sleep(10);
                                }
                            }
                        }
                        #endregion
                    }
                    else//目录下无子文件夹存在时,判断是否有文件
                    {
                        string[] fileList = null;
                        if (Directory.Exists(FilePath))
                        {
                            //获取文件列表
                            fileList = Directory.GetFiles(FilePath);
                            if (fileList != null)//目录不存在
                            {
                                if (fileList.Length != 0)//目录下是否存在文件
                                {
                                    #region 删除文件
                                    foreach (var filePath in fileList)//循环删除文件
                                    {
                                        DateTime itemDateTime = new FileInfo(filePath).LastWriteTime;//获取文件修改日期
                                        if (CurrentTime.AddDays(-RtnDayNums) > itemDateTime)
                                        {
                                            if (File.Exists(filePath))
                                            {
                                                File.Delete(filePath);
                                                Thread.Sleep(2);
                                            }
                                        }
                                    }
                                    #endregion
                                }
                                else
                                {
                                    #region 删除文件夹
                                    Directory.Delete(FilePath, true);
                                    #endregion
                                }
                            }
                        }
                    }
                }
                b_OK = true;
            }
            catch (Exception)
            {
                b_OK = false;
            }
            stopWatch.Stop();
            time = stopWatch.ElapsedMilliseconds;
            LogHelper.Instance.WriteLog($"{FilePath},清理结束,结果;{b_OK},耗时:{time}", "Info");
        }

        /// <summary>
        /// 获取指定目录中所有文件列表
        /// </summary>
        /// <param name="directoryPath">指定目录的绝对路径</param>        
        public DirectoryInfo[] GetSubcatalog(string directoryPath)
        {
            DirectoryInfo dir = new DirectoryInfo(directoryPath);
            //如果目录存在
            if (dir.Exists)
            {
                //获取文件列表
                DirectoryInfo[] dirs = dir.GetDirectories();
                return dirs;
            }
            else
                return null;
        }

        #endregion
    }
}